Getting started
SQT0351
17
• This unit cannot connect the TV that does not have the
HDMI terminal.
• Keep the RF coaxial cables as far away as possible from
other cables.
• The HDMI connection supports VIERA Link “HDAVI
Control” (> 79).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
§
A 21-pin Adaptor is required for
AUDIO/VIDEO terminal.
• VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
• When using a TV or an amplifier/receiver that does not
display “ARC” on the HDMI terminal, it is necessary to
connect the TV and the amplifier/receiver with a digital
audio cable to enjoy the TV audio on the amplifier/receiver.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( CATV Signal )” is set to “Off”)]
Connect the Set Top Box or video equipment
Set Top Box or video equipment
21-pin Scart cable
§
Amplifier/receiver connections
HDMI terminal
HDMI
cable
Amplifier/
receiver
TV
HDMI cable
(ARC)
(ARC)
• You will not be able to view 3D programmes or
4K images with this connection if your
amplifier/receiver is not 3D or 4K compatible.
DMR-BCT84_74EN_eng.book 17 ページ ２０１４年７月２４日 木曜日 午後５時３分
To Next Page
Loading...
