Advanced operation
44
RQT6559
Using on-screen menus
[RAM] [DVD-R] [DVD-V] [VCD]
∫ When “User” is selected
Select “Detail picture adjustment”.
(“User” ➜ [2] ➜ [4] ➜ [ENTER])
Page 1/2 of “Detail picture adjustment”
Press [ENTER] to enter the setting.
Press [3] or [4] until page 2/2 appears.
Page 2/2 of “Detail picture adjustment”
Press [ENTER] to enter the setting.
∫ When you have set “TV Type” to “480P” in
SETUP (
➜page 14)
§
Only applicable in cases where the “Progressive” function is ON.
∫ Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD video which has been set at 16:9 will be displayed cor-
rectly. However, 4:3 video material (➜ below) will be stretched to the
right and left when displayed.
To view the picture at the right aspect
≥For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust as
necessary.
≥For televisions which do not allow the aspect of progressive
images to be adjusted, please turn OFF “Progressive”.
4:3 video materials are usually found
≥In general television broadcasts (excluding some wide picture
broadcasts) and any pictures from discs that recorded such pro-
grams.
≥In DVDs with a lateral ratio of 4:3 indicated on the jacket.
≥Video CD pictures
Video menu
Item Content
Picture Normal:
Soft: Soft picture with fewer video arti-
facts
Fine: Details are sharper
Cinema: Mellows movies, enhances detail in
dark scenes.
User: You can make further adjustments.
See below.
MPEG-DNR (When any item other than “User” is
selected)
You can turn on and off the recom-
mended settings for 3D NR, block
NR, and mosquito NR.
ON()OFF
Contrast Increases the contrast between light and
dark parts of the picture (j7 to i7).
Brightness Brightens the picture (0 to i15).
Sharpness Adjust the sharpness of the edges of the ver-
tical lines (j6 to i6).
Color Adjusts the shade of the picture’s color (j7
to i7).
Gamma Increases the brightness of the center
ranges to improve detail and contrast in dark
scenes (0 to i5).
3D NR Reduces overall noise (0 to i4).
Block NR Smoothes block noise (0 to i3).
Mosquito NR Reduces the smudging that appears around
contrasting sections of the picture (0 to i3).
Disc
Video
Audio
Play
Picture
MPEG-DNR
Normal
ON
!?
Disc
Video
Audio
Play
Picture
Video
1/2
Contrast
Brightness
Color
Sharpness
0
0
0
0
i
i
i
i
Det
2/2
Disc
Video
Audio
Play
Picture
Video
2/2
0
0
0
0
i
i
i
i
Gamma
3D NR
Block NR
Mosquito NR
Det
!?
Item Content
Progressive ON: Enables progressive output
OFF: Disables progressive output
Transfer
§
Select the method of conversion for progres-
sive output to suit the type of material being
played (➜page 57, Film and video).
Auto1 (normal): For film material
Auto2: For film material (the same as
Auto1, but able to convert 30-frame-
per-second progressive video.)
Video: For video material
Disc
Video
Audio
Play
Picture
MPEG-DNR
Normal
ON
Progressive
Auto 1ON
Transfer
!?
45
RQT6559
Advanced operation
Home Theater
Refer to the relevant pages for details.
Other uses
Record to digital recording equipment or cassette deck (➜page 47)
Record from a video cassette recorder (➜page 29)
Enjoying CATV broadcasts
What you want to do How to do it
Reference
pages
Settings
Reference
pages
Enjoying CATV
broadcasts
Connect a cable TV box or
satellite receiver.
46 Tune to channels correctly. 55
Change the necessary set-
tings on the equipment you
have connected.
—
Enjoying more powerful sound
Enjoying 5.1-chan-
nel surround sound
with Dolby Digital
and DTS
Digital connection
Connect to an amplifier with
built-in decoders.
47
[A]
SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital and DTS to
suit the equipment.
51
Change speaker settings on
the amplifier.
—
Enjoying stereo or
Dolby Pro Logic
Analog connection
Connect to an analog
amplifier or system compo-
nent.
47
[B]
SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to Off.
51
Digital connection
Connect to a digital ampli-
fier or system component.
47
[A]
SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital to PCM.
≥Set DTS to Off.
51
To Next Page
Loading...
