Panasonic DMR-E75VP - Page 30

Item FL display Key operation
Mode name Description (Remote controller key)
White Picture
Output
White picture is output as
component Output from AV
Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/
Progressive by “I/Pswitch: [1] [4]”
*Initial mode is “Interlace”. Press [1] [1] in service
mode.
Switch Interlace/
Progressive
Press [1] [4] in White
Picture Output mode.
*I/P are switched
alternately.
Magenta Picture
Output
Magenta picture is output with
Component Output from AV
Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/
Progressive by “I/Pswitch: [1] [4]”
*Initial mode is “Interlace”. Press [1] [2] in service
mode.
Switch Interlace/
Progressive
Press [1] [4] in Magenta
Picture Output mode.
*I/P are switched
alternately.
49