Panasonic DMR-E75VP - Page 31

Item FL display Key operation
Mode name Description (Remote controller key)
RTSC Return in
XP
(A & V)
L1 input signal is encoded (XP),
decoded (XP) and output
decoded signal to external
without DISC recording and DISC
playback.
Initial mode: EE2/ Interlace
/ XP/ Audio 48kHz
Press [1] [3] in service
mode.
Switch Interlace/
Progressive
Press [1] [4] in RTSC
Return XP mode.
*I/P are switched
alternately.
Audio 44.1 kHz/ 48 kHz
Switch
Press [2] [4] in RTSC
Return XP mode.
*48 kHz / 44.1 kHz are
switched alternately.
I/P Switch Switch Interlace and Progressive
in EE mode.
*Initial setting is “Interlace”.
*This command is effective
during executing “White Picture
Output”, “MagentaPicture
Output” and “RTSC Return in XP
(A & V)” modes.
Initial mode is Interlace
Switch Interlace/
Progressive
Press [1] [4] in I/P Switch
mode.
*I/P are switched
alternately.
Audio Mute
(XTMUTE)
Check whether mute is applied
normally by the timer
microprocessor.
Press [2] [1] in service
mode.
Audio Mute
(XDMUTE)
Check whether mute is applied
normally by the Digital P.C.B.
(GLUE IC).
Press [2] [2] in service
mode.
50