Panasonic DMR-E75VP - 16. (DVD) Caution after parts replacing parts; 16.1. (DVD) After replacing the RAM Drive with new one; 16.2. (DVD) When the unit does not operate normally after replacing the Timer Microprocessor with new one; 17. (VHS) Caution after replacing parts

16. (DVD) Caution after parts replacing parts
16.1. (DVD) After replacing the RAM Drive with new one
Caution:
In this case, all parameters are initialized.
16.2. (DVD) When the unit does not operate normally after replacing
the Timer Microprocessor with new one
in order to transmit the
Step Operation Descriptions
1 While power is ON, short IC37508-4 pin (RESET) and
the GND.
“RESET (L)” is transmitted to
the
terminal of Timer
Microprocessor
11 pin), then the unit operates
normally.
17. (VHS) Caution after replacing parts
PG Shifter Automatic Adjustment and X-VALUE & LINEARITY (P2 and P3 Posts) ADJUSTMENT
56