Panasonic DMR-E75VP - 17.1. (VHS) Adjustment Procedures after replacing DD Cylinder, VHS Microprocessor or Main P.C.B.

should be performed after replacing DD Cylinder, VHS Microprocessor or Main P.C.B.
17.1. (VHS) Adjustment Procedures after replacing DD Cylinder, VHS
Microprocessor or Main P.C.B.
ADJUSTMENT PROCEDURE
PROCEDURE F.I.P. DISPLAY
Turn on the Service Mode
1.Press the FF key and the EJECT key simultaneously for
more than 3 seconds.
Activate the Service Mode 2
2. While keep pressing FF key, press the EJECT key twice.
Activate the Entering Mode.
3. Press the EJECT key for more than 3 seconds.
Set the Mode 2.
4. Press the CH UP key once.
Insert the alignment cassette tape (VFM8080HQFP)
5. The PG Shifter Adjustment starts automatically.
When the sequence of the automatic adjustment has been terminated, the
following action has been made.
SUCCEED: The cassette tape is ejected.
ERROR:The "F20", "F21", "F22" or "F23" is displayed. Refer to next PG Shifter
Adjustment
Self-Diagnosis Indication Table regarding the details of the indications.
Exit from Service Mode.
6. Press FF and EJECT keys simultaneously in 6 times.
Then the FIP becomes normal indication.
(Normal Indication)
PG SHIFTER AUTOMATIC ADJUSTMENT SELF-DIAGNOSIS INDICATION
57