Panasonic DMR-EH55EC

Error
Code
Diagnosis contents Description Monitor
Display
Automatic FL display
U99 Hang-up Displayed when communication
error has occurred between Main
microprocessor and Timer
microprocessor.
No display
Displayed is left until the
[POWER] key is pressed.
H19 Inoperative fan motor When inoperative fan motor is
detected after powered on, the
power is turned off automatically.
The event is saved in memory.
No display No display
F00 No error information Initial setting for error code in
memory
(Error code Initialization is
possible with error code
initialization and main unit
initialization.)
No display No display
F58 Drive hardware error When drive unit error is detected,
the event is saved in memory.
No display No display
F34 Initialization error
when main
microprocessor is
started up for program
recording
When initialization error is
detected after starting up main
microprocessor for program
recording, the power is turned
off automatically.
The event is saved in memory.
No display No display