3. Turn on power of DVD Recorder.
4. After [PLEASE WAIT] is displayed on FL., [HDD ERR] is displayed
on FL.
5. Tray opens automatically.
6. Insert updating disc for Firmware and press OPEN/CLOSE key. (If
a wrong disc was inserted, [NG DISK] [NO FVU] is displayed on
FL.)
7. [LOAD] [LD FVU] [M_FIRM] are displayed on FL alternately.
8. [MAIN] [UPD OK] blink alternately and Tray opens. Take out
disc (Writing was finished).
9. Press Power button to turn off power.
10. Press Power button to turn on power.
11. [HELLO] [SELF CHECK] are displayed on FL.
12. [UNFORMAT] is displayed on FL.
13. After [UNFORMAT] was displayed, message to request FORMAT
is displayed on TV screen.
14. Select [Yes] and press [ENTER] key to format HDD.
(After FORMAT, program in HDD will be lost, but Main firm will not be lost.
“Write of the main farm" is completed above.
* Drive firm is not updated by above operation. If you wish update Drive firm, please prepare the
disc for latest firmware update, and write it again.
* If the version of the firm you have prepared was same as or later than that has already been
written in deck, 'UNSUPPORT' is displayed on FL.
* In a usual updating of firmware, writing is not performed when the timer reservation standby
was not released.
11.3. Standard Inspection Specifications after Making Repairs
After making repairs, we recommend performing the following inspection, to check normal
operation.
48
To Next Page
Loading...
