Item FL display Key operation
Mode name Description Front Key
Progressive
initialization
The progressive setting is
initialized to Interlace.
The display before
execution leaves.
When the power is on (E-
E mode), press [STOP]
and [PLAY]
simultaneously for 5
seconds.
8.1.3. Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Item FL display Key operation
Mode name Description (Remote controller key)
Release Items Item of Service Mode executing
is cancelled.
Press [0] [0] or [Return] in
service mode.
Error Code
Display
Last Error Code of U/H/F held by
Timer is displayed on FL.
*Details are described in “8.1.1.
Self-Diagnosis Functions”.
If any error history dose
not exist, [F00] is
displayed.
Press [0] [1] in service
mode
To Next Page
Loading...
