Item FL display Key operation
Mode name Description (Remote controller key)
Delete the Error
History
Delete Error History information
stored on the unit.
Press [9] [7] in service
mode.
SD card WRITE
check
Delete Error History information
stored on the unit.
When the WRITE check is
OK.
When the WRITE check is
NG.
*Note:
The image stored in the
SD card will be erased.
Insert a SD card to SD
card slot, and press [7] [4]
in service mode.
*Insert SD card while the
power is off.
*Check for [CARD SD]
display on the FL display
and go on the procedure.
AV4(V)/AV1(RGB) I
/O Setting
Set input to AV4 (V) and set
output to AV1 (RGB) for I/O
checking
Press [8] [0] in service
mode.
AV2(Y/C)/AV1(V) I/
O Setting
Set input to AV2 (Y/C) and set
output to AV1 (V) for I/O checking
Press [8] [1] in service
mode.
AV2(V)/AV1(Y/C) I/
O Setting
Set input to AV2 (V) and set
output to AV1 (Y/C) for I/O
checking
Press [8] [2] in service
mode.