Recording
VQT4G61
29
Select the items and change the items.
Channel
• You can select Category with the red button.
Day/Date
• You can select “Date” or “Weekly” by pressing
the green button.
Start/Stop
• Press and hold [3, 4] to alter in 15-minute
increments.
Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over the
old one.
1 Select “Renew”.
2 Select “ON”.
Title Name
1 Select “Title Name”, then press [OK].
2 Refer to “Entering text”. (> 77)
You can make timer recording of the current or
next programme.
1 While watching a programme
Press [STATUS ].
2 Display the channel information of a
programme to record.
• Switch the programme with [2, 1].
3 Press the yellow button.
4 Go to step 3 on page 28.
• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• Even if you switch the unit to standby mode
during the timer recording, the recording is
continued.
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while:
- copying HD Video (AVCHD) from USB device
or SD card
- copying photos/music
- formatting
Timer recording options
Timer Recording SUN 01.01.2012 8:05 AM
30:24
Channel
1SAT 01.01
Day/Date Stop
8:00 9:00
Start
RETURN
Category Date/
Weekly
Title Name
OK
HDDRemain
Timer recording from channel
information
Notes on timer recording
10:30 AM
1
Now
Dolby DRating: G
Change category
All Digital Channels
NEWS
9:00 AM - 11:00 AM
Set timer
DMRHW220GL_eng.book 29 ページ 2012年4月27日 金曜日 午後2時12分