Convenient functions
VQT4G61
67
Auto Setup
You can restart the Auto Setup. (> 18)
Select “Yes”, then press [OK].
Download from TV
Select “Download from TV” when you connect
the unit to a VIERA Link (HDAVI Control 3 or
later) compatible TV with an HDMI cable.
Select “Yes”, then press [OK].
Manual Tuning
You can add new channels manually.
1 Select the channel.
2 Adjust the frequency.
• Adjust the frequency by checking the signal
strength and signal quality displays.
3 Press [OK] to start scan.
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
• After performing “Update Channel List” or “Manual Tuning”
if the channel number has already been assigned,
channel number for them will be assigned from 800ch
onward.
Child Lock ( Parental Rating )
You can restrict the viewing of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and
playback.
• PIN is required to change. (> 64)
Signal Condition
You can check the quality and strength of
signals.
Press [CH WX] to select the channel.
• Signal Quality:
Red bar: Bad
Yellow bar: Poor
Green bar: Good
• Signal Strength:
“0”: 0%
“10”: 100%
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Channel Name
Digital TV Signal Condition
RETURN
Channel Up
Channel Down
Good
Poor
Bad
Signal Strength
0108642
Signal Quality
RF Parameter [ ] MHz
Network Name
CH
DMRHW220GL_eng.book 67 ページ ２０１２年４月２７日 金曜日 午後２時１２分
To Next Page
Loading...
