Getting started
SQT0815
21
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial power on.
3 Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen appears, the
setting information on the TV is acquired by this unit.
(> 85)
Auto Setup starts.
(This operation may take some time.)
e.g., [For_Australia]
4 Clock is set automatically.
If the clock setting screen appears, set the
time manually. (> 83, Clock)
5 Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
For details, refer to “Quick Start”. (> 82)
6 If the TV aspect setting screen appears:
Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 78)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to set network settings.
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 20)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “Digital TV Tuning”,
then press [OK].
4 Select “Yes”, then press [OK].
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Setting
Progress
Digital TV Auto Tuning
CH 6 69
RF Ch
Digital TV: 2
Searching
Quality
Type
Channel Name
This will take about 3 minutes.
35
10
10
35
Digital TV
Digital TV
DMR-PWT550GLGZ_eng.book 21 ページ ２０１５年２月２日 月曜日 午後７時２６分
To Next Page
Loading...
