Setup
TQBS0149
91
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (> 76) are
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to “Software (Firmware) Update”.
(> 76)
Software Update Now ( Internet )
Refer to “Software (Firmware) Update”.
(> 76)
Software Licence
Information about the software licence is
displayed.
OK
Remember the PIN.
PIN Entry
0 0 0 0
System Information
Display Software (firmware) version and
Wireless Module version (When using wireless
connection only) of this unit.
Initialize
Shipping Condition
All the settings except for some settings
return to the factory preset.
• The timer recording programmes are also
cancelled.
• The device password is also initialized.
(> 87)
Default Settings
All the settings other than the tuning settings,
clock settings, language settings, rating PIN,
remote control code, device password, etc.
return to the factory presets.
DMR-UBC86EN_eng.book 91 ページ ２０１７年８月８日 火曜日 午前１１時１２分
To Next Page
Loading...
