Panasonic DP-0 Series - Page 3

3
APPLICATIONS
Suction conrmation for electronic parts Reference pressure check
High-quality LCD display
Compact & light weight design
Low pressure type and high pressure type available
Low pressure type: kPa, kgf/cm
2
, bar, psi, mmHg
High pressure type: MPa, kgf/cm
2
, bar, psi
Comparative output
ON/OFF display
Key lock icon
OVER mark
Pressure unit display
Pressure/setting display
Mode
Display
color setting
RUN mode
Detailed mode
Comparative output ON Comparative output OFF
Red for ON, white for OFF
Red White
Pink
White for ON, red for OFF
White Red
Red in normal status
Red
White in normal status
White
RUN mode
Detailed setting mode
42.5 mm 1.673 in
< Actual size >
24.9 mm
0.980 in
Approx. 40 gApprox. 40 g
Approx.
25 g
DP-0 series
Conventional model
(DP-100 series standard pressure port type)
Low
pressure type
High
pressure type
DP-001□
DP-002□
−100 kPa 100 kPa
1 MPa
0 kPa
Ideal for applications such
as suction. No mis-operations
occur due to vacuum
breakdown.
Ideal for applications such
as checking reference
pressure. Can also be
used for simple suction.
<Low pressure type>
<High pressure type>
Simple and highly visible display
The LCD offers a wide viewing angle so the display
is easy to see even from an oblique angle. The
alphanumeric display (12-segment display), the key lock
mark and the OVER mark are also clear and easy to see.
Extra-short depth and light weight
The unit body measures only 24.9 mm 0.980 in in depth
to allow installation in a shallow space. The main unit
weighs only about 25 g. The lightweight unit means
minimal load when mounted on a moving part such as a
robot arm.
Comparison with
conventional model
DP-100 series standard
pressure port type
Depth
dimension
:
Approx.
41
% shorter!
Main unit
weight
:
Approx.
38
% lighter!
Two types to choose from depending on your application
The low pressure type can be used with positive or
negative pressure, while the high pressure type is
suitable for positive pressure of up to 1 MPa.
Selection of display color from red or white
The display color can be selected from red or white
in accordance with the output operation. Since the
detailed setting mode display is pink (unchangeable),
the pressure sensor status can be easily recognized by
color.
( )
Digital Pressure Sensor DP-0 SERIES