Installing the LPR (Line Printer Remote) Monitor
19
Windows 98/Me
Printer Section
NOTE
1 To print data via LAN, the LPR Monitor must be installed on your PC.
11
The Add Port dialog box appears. Click the Other
radio button, select HLPRMON from "Click the type
of port you want to add:" list and click the
button.
12
The LPR Port Name dialog box appears.
Type the IP Address of the machine and "lp" as the
queue name separated by a ":" (colon).
Ex: 10.74.229.105:lp
Click the button. If an error occurs
because the queue name had already been used for
the same IP Address, select a different unique name
such as "lpr".
13
The screen reverts to the Printer Properties.
Check that the "Print to the following port:" has been
changed as entered in step 12, and click the Apply
button first and then the button.
The printer properties dialog box closes and you
have now configured the printer as a network printer.
OK
OK
OK
To Next Page
Loading...
