Configuring the PS Driver Security Utility
84
If you are using Mac OS X, use the PS Driver Security Utility to change the setting before adding the printer.
If you have already added the printer, delete it, change the setting using the PS Driver Security Utility, then
add the printer.
• User ID
Input the user ID (8 numbers maximum) to be used for MailBox or Secure MailBox.
• Password
Input the password (4 numbers maximum) to be used for Secure MailBox.
• Department Code
Input the department code (8 numbers maximum) to be used by the accounting manager.
• OK
Stores the input values and closes the utility.
• Cancel
Cancels the input values and closes the utility.
NOTE
1 The department code must be input for customers for which charge management is to be
performed using an accounting management application.
Mac OS 8.6/9.x/X
To Next Page
Loading...
