Configuring the Printer Driver Settings
46
General Tab
1. Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an existing user will remain
unchanged even if the comment is modified later.
2. Location
Specifies the printer location.
3. Driver
Displays the printer driver type. Specify the printer being used or a printer model that can be emulated
with the printer being used.
Click button updates or modifies the printer driver.
4. button
This feature is not available on your machine.
5. button
Specify the processor to be used for printing (Print Processor) and the data type (Default Data type).
The processor and data type affect the manner in which the printer functions in Windows NT. Normally
they do not need to be modified. However, modification might be necessary when the printer is used with
a special application.
6. button
Prints a test page. This allows the user to verify if the printer is installed properly.
NOTE
1. In Windows NT 4.0, setting the properties depends on the logon account. This section
describes properties to be specified by the administrator (system manager).
See "Printing from Windows Application" for details on user properties. (See page 85)
Windows NT 4.0 (Administrator Settings)
New Driver...
Separator Page...
Print Processor...
Print Test Page
To Next Page
Loading...
