Configuring the Printer Driver Settings
47
Windows NT 4.0 (Administrator Settings)
Printer Section
Ports Tab
1. Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
2. / button
Adds/deletes a new port or a new network path.
3. button
Configures the selected port. In case of a parallel port, Transmission Retry should be specified.
4. Enable bidirectional support
On a printer, this setting enables reception of configuration data and status data from computer.
5. Enable printer pooling
Printer pooling allows outputting data from one logical printer to two or more printers. With printer pooling
enabled, a transmitted printing job is output to the first printer that is ready for printing.
Add Port...
Delete Port
Configure Port...
To Next Page
Loading...
