Configuring the Printer Driver Settings
43
Windows 98/Me
Printer Section
• Tray Switching
Allow the paper to be fed continuously if the same size of paper is loaded in another paper tray (Auto
Tray Switching). If not selected, the machine will stop if paper runs out in the chosen paper tray.
4. Installable options
Specifies the following printer settings:
• Number of Paper Trays
Select the number of available paper trays for the printer if an optional system console is installed.
• Large Capacity Paper Tray (LCT)
Select if a Large Capacity Paper Tray is installed.
• Finisher
Select the type of Finisher if a Finisher is installed.
• Punch Unit
Select if a Punch Unit is installed.
• Hard Disk Drive
Select if the HDD Unit is installed.
• Memory
Select the memory (Standard or additional).
(Only available if the optional HDD unit (DA-HD60) is installed)
5. button
Displays the help window for this printer driver.
6. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.
NOTE
1 Device Option Tab specifies device-specific settings and settings of optional devices.
Help
Restore Defaults
To Next Page
Loading...
