Panasonic DP-3510

Configuring the Printer Driver Settings
59
Windows 2000/XP (Administrator Settings)
Printer Section
Device Settings Tab
Specifies the following printer settings and options:
• Form To Tray Assignment
Specifies the paper size of each available tray.
• Font Substitutuion Table
Specifies which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to
your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your
document.
• Available PostScript Memory
Specifies the amount of available printer memory. The driver uses this information when performing
printing tasks, such as sending fonts from the computer to the printer.
• Output Protocol
Specifies the data format to the printer. Only use this option if you are an advanced user with experience
working with PostScript.
• Send CTRL-D Before/After Each Job
Sends a CTRL+D to notify the printer that the current job has finished printing and to reset the printer. Only
use this option if you are an advanced user with experience working with PostScript.
• Convert Gray Text/Grapgics to PostScript Gray
This feature is not available on your machine.
• Add Euro Currency Symbol to PostScript Fonts
Adds the European currency symbol to most PostScript fonts.
• Job timeout
Specifies the maximum number of seconds that the print job can take to get from the computer to the
paper before the job is canceled.
A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of
zero.