Panasonic DP-4530 - Page 115

115
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(8) Remove the Snap Ring (H6).
(9) Remove the Guide Bracket (9112).
(10) Remove the Pickup Roller (9107).
(11) Remove 3 Screws (J3).
(12) Remove the Reinforcement Bracket (9101).
(13) Remove the Paper Feed Roller (9111).
(14) Disconnect All Harnesses on the LCT PC
Board.
(15) Remove 1 Screw (21).
(16) Release 5 Card Spacers (8903) on the LCT PC
Board.
(17) Remove the LCT PC Board (8408).