793
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 3-074
(3) Place the Stapler Unit [3] as shown.
(4) Remove 2 Screws [4], and detach the Guide [5].
Fig. 3-075
(5) Turn the Tab [2] on the Stapler side in the
direction of the arrow so that the Fixing Screw [7]
of the Slide Home Position PCB [6] is in view
through the round hole.
(6) Remove the Fixing Screw [7].
Fig. 3-076
(7) Disconnect the Connector [8].
(8) Remove the Flexible Cable Retainer [9].
(9) Free the Lock [10] of the Connector in the
direction of the arrow; then, detach the Flexible
Cable [11], and then detach the Slide Home
Position PCB [12].
[4]
[4]
[3]
[5]
[2]
[6]
[7]
[8]
[12]
[9]
[10]
[11]
To Next Page
Loading...
