Panasonic DP-4530 - Page 817

817
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Table 5-020
9. E7-52, Paddle Motor Fault (For DA-FS355 only)
Table 5-024
Shift Motor (M6), Wiring
4) Is the wiring between the Finisher Controller PCB and the shift motor normal?
YES:Replace the shift motor.
NO :Correct the wring.
Paddle Home Position Sensor (PI2)
1) Check the paddle home position sensor. Is the sensor normal?
NO :Replace the sensor.
Swing Guide Home Position Sensor (PI3)
2) Check the swing guide home position sensor. Is the sensor normal?
NO :Replace the sensor.
Wiring
3) Is the wiring between the Finisher Controller PCB and the paddle motor normal?
NO :Correct the wring.
Paddle, Swing Guide Assembly
4) Try turning the paddle motor clockwise and counter-clockwise by hands. Is there
mechanical tapping in the rotation of the paddle or the up/down movement of the
swing guide?
YES:Correct the mechanical mechanism.
Paddle Motor (M2), Finisher Controller PCB
5) Try replacing the paddle motor. Is the problem corrected?
YES:End.
NO :Replace the Finisher Controller PCB.