Panasonic DP-4530 - Page 819

819
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. E7-28, Punch Motor Fault
Table 5-028
4. E7-57, Punch Sensor (Horizontal Registration) Fault
Table 5-029
Punch Motor Home Position Sensor (PI1P)
1) Check the punch home position sensor. Is the sensor normal?
NO :Replace the sensor.
Punch Motor Clock Sensor (PI3P)
2) Check the punch motor clock sensor. Is the sensor normal?
NO :Replace the sensor.
Wiring
3) Is the wiring between the Finisher Controller PCB and the sensor normal?
NO :Correct the wring.
Punch Mechanism, Punch Motor (M1P)
4) Is there a fault in the punch mechanism?
YES:Correct the punch mechanism.
NO :Replace the punch motor.
Punch Controller PCB, Finisher Controller PCB
5) Try replacing the punch controller PCB. Is the problem corrected?
YES:End.
NO :Replace the Finisher Controller PCB.
Horizontal Registration Sensor (Photo Sensor PCB / LED PCB)
1) Check the horizontal registration sensor. Is the sensor normal?
NO :Replace the sensor.
Wiring
2) Is the wiring between the punch controller PCB and the horizontal registration
sensor normal?
NO :Correct the wring.
Punch Controller PCB, Finisher Controller PCB
3) Try replacing the punch controller PCB. Is the problem correct?
YES:End.
NO :Replace the Finisher Controller PCB.