To Next PageTo Next PageHow to fix document misfeeding on Panasonic All in One Printer?
If the document is misfeeding in your Panasonic All in One Printer, try the following: * Reload the document properly. * Remove any document jams. * Adjust the ADF (Automatic Document Feeder).
What to do if during initial handshake, receiving station did not respond or communication error occurred on my Panasonic Copier?
If, during the initial handshake, the receiving station did not respond or a communication error occurred on your Panasonic Copier: 1. Check with the other party. 2. Reload the document and send again.
What to do if the communication aborted by the transmitting side on my Panasonic Copier?
If communication is aborted by the transmitting side on your Panasonic Copier, check with the other party.
What to do if the remote side confirmation of previous page is illegible on my Panasonic Copier?
If the remote side confirmation of the previous page is illegible on your Panasonic Copier, wait a few minutes and send again.
What to do if my Panasonic Copier document is misfeeding?
If your Panasonic Copier document is misfeeding, try the following: 1. Reload the document properly. 2. Remove any document jams. 3. Adjust the ADF (Automatic Document Feeder).
What to do if my Panasonic Copier has no data from the transmitting side?
If there is no data from the transmitting side on your Panasonic Copier, check with the other party.
What to do if my Panasonic Copier interface is incompatible?
If the interface is incompatible with your Panasonic Copier, check with the other party.
What to do if my Panasonic Copier received data has too many errors?
If the received data has too many errors on your Panasonic Copier, check with the other party.
What to do if my Panasonic Copier has no confirmation from the receiving station for the previous page sent?
If there is no confirmation from the receiving station for the previous page sent by your Panasonic Copier, wait a few minutes and try sending again.
What to do if my Panasonic Copier has no polling capability at the remote side?
If the remote side has no polling capability with your Panasonic Copier, ask the remote side to set 'POLLED=ON'.
General| Type | All-in-One Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Print Speed (Black) | 16 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 kbps |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Reduction / Enlargement | 25% - 400% |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Mac |
| Display | LCD |
