11.9. Disassembling the Sub-Shaft Preload Spring
1. Remove the screw.
Notes
- Handle the sub-shaft preload spring carefully because the shape of
the tip is easily deformed.
- The sub-shaft preload spring is not part of the optical pickup.
Before replacing the optical pickup, remove the sub-sahft preload
spring for use with the new optical pickup.
- After installation, use screw lock to lock the screw in position.
11.10. Assembling the Optical Pickup
1. Install the optical pickup.
Note
Take care not ot attach the tilt spring and guide shaft in the wrong order.
29
To Next Page
Loading...
