RQT6236
11
Advanced operations
Convenient features
[DVD] [CD]
[VCD]
(When the elapsed play time is displayed)
During play
Press [REPEAT].
Each time you press the button:
[DVD]
Chapter (C)>Title (T)
§
>OFF
^--------------------------------------}
[CD] [VCD]
Track (T)>Entire disc (A)>OFF
^--------------------------------------------}
[CD] (MP3 discs)
Track (T)>Group (G)
§
>OFF
^-------------------------------------}
§
“All (A)” during program and random play.
If the Video CD has playback control
1. Press [∫] during play until “PBC PLAY” is cleared from the display.
2. Press the numbered buttons to select a track to start play (➡
➡➡
➡ page 10).
3. Press [REPEAT] (➡
➡➡
➡ above).
[Note]
You cannot use repeat play to repeat an entire DVD or an entire MP3 disc.
∫ To repeat only your favorite tracks/chapters
Start program play (see right) and press [REPEAT] to display “A”.
You can repeat a section between points A and B within a title or track.
During play
1
Press [A-B REPEAT] at the starting point (A).
2
Press [A-B REPEAT] at the finishing point (B).
To cancel
Press [A-B REPEAT] until “1¢¢” is displayed.
[Note]
≥Some subtitles recorded around point A or B may fail to appear. [DVD]
≥The unit automatically determines the end of a title/track as point B when
the end of the title/track is reached.
≥A-B repeat is canceled when you press [QUICK REPLAY].
Remote control only
You can select up to 32 items to play in the order you choose.
While stopped
1
Press [PROGRAM].
2 [DVD,\MP3\discs\only]
Press the numbered buttons to
select a title (DVD) or group (MP3 discs).
≥Some items cannot be selected.
≥Different titles have different soundtrack and subtitles.
3
Press the numbered buttons to select a track (CD
or VCD) or chapter (DVD) (and, for MP3 discs
press [ENTER]).
≥Repeat steps 2 and 3 to program other items.
≥To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press [ENTER]
again to register the number.
All the items on a disc, a title or a group are selected when you
select “ALL”.
≥Times are not displayed when programming DVD and MP3.
4
Press [1] (PLAY).
Play now begins in the programmed sequence.
≥Some items cannot be played even if you programmed them. [DVD]
To add or change items
Press [3, 4] to select an available item, then repeat steps 2 and 3.
To move to the page before or after the one shown
Press [6] or [5].
To clear the programmed items one by one
Press [3, 4] to select the item number (No) and press [CANCEL]. (Alter-
natively, you can select “Clear” with [3, 4, 2, 1] and press [ENTER].)
To clear the whole program
Move to “Clear all” with [3, 4, 2, 1] and press [ENTER]. The whole pro-
gram is also cleared when the unit is turned off or the disc tray is opened.
To exit the program mode
Press [PROGRAM] while stopped. (The program is retained in memory.)
While stopped
1
Press [RANDOM].
2
Press the numbered buttons to select a title (DVD
only) and press [1] (PLAY).
≥Some titles cannot be selected. [DVD]
Play now begins in random order.
To exit the random mode
Press [RANDOM] while stopped.
Repeat play
A-B repeat play
C T
OFF
To Next Page
Loading...
