Error
Code
Error Content Additional error explanation Defect 1 Defect 2
U, H error
U11 Focus error
U15 Unfinalized DVD-
R
H01 Tray loading error
H02 Spindle servo
error
(Spindle servo, DV3.2 (IC8001) SP
motor, CLV servo error)
H03 Traverse servo
error
H04 Tracking servo
error
H05 Seek error
H06 Power error Cannot switch off the power
because of the panel and system
computer communication error
H07 Spindle motor
drive error
Spindle
motor
ass’y
DSC related
F500 DSC error DV3.2 (IC8001) stops in the
occurence of servo error (starup,
focus error, etc)
Optical
pickup
DV3.2
(IC8001)
F501 DSC not Ready DSC-system computer
communication error
(Communication failure caused by
idling of DSC)
DV3.2
(IC8001)
F502 DSC Time out
error
Similar disposal as F500 Optical
pickup
DV3.2
(IC8001)
F503 DSC
communication
Failure
Communication error (result error
occured although communication
command was sent)
DV3.2
(IC8001)
EEPROM
(IC8611)
F505 DSC Attention
error
Similar disposal as F500 Optical
pickup
DV3.2
(IC8001)
F506 Invalid media Disc is flipped over, TOC
unreadable, incompatible disc
DISC DV3.2
(IC8001)
ODC related
F600 Access failure to
management
information
caused by
demodulation
error
Operation stopped because
navigation data is not accessible
caused by the demodulation defect
DV3.2
(IC8001)
35
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page