Panasonic DVD-S42EE - Last Error Code Saved During no PLAY

Error
Code
Error Content Additional error explanation Defect 1 Defect 2
F890 Sending
message when
message is being
sent to AV task
Sending message to AV task
F891 Message couldn’t
be sent to AV
task
Begin sending message to AV task
F893 FROM
falsification
FROM
(IC8651)
DV3.2
(IC8001)
F894 EEPROM
abnormality
EEPROM
(IC8611)
Serial
communication on
lone
F895 Language area
abnormality
Firm version agreement check for
factory preset setting failure
prevention
FROM
(IC8651)
F896 No existence
model
Firm version agreement check for
factory preset setting failure
prevention
F897 Initialize is not
completed
Initialize completion check for
factory preset setting failure
prevention
F898 Disagreement of
hardware and
software
Unsuitable combination of AV
DECORDER, SDRAM and FLASH
ROM (firmware)
F8A0 Message
command is not
appropriate
Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk
for protection of copyrights.
9.4. Last Error Code saved during NO PLAY
37
PDF created with pdfFactory Pro trial version www.pdffactory.com