9
RQT8512
Basic play
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
≥ To play [MP3],[JPEG] or [MPEG4] on DVD-RAM that contain both [DVD-VR]
and another
format (e.g. [JPEG]), select “Play as Data Disc” (➜ Page 18, Other Menu).
≥ “D.MIX” on the display indicates that a soundtrack with three or more channels can be
down-mixed to two channels (➜ Page 28, Glossary).
≥ Discs continue to rotate while menus are displayed. Press [∫] when you finish to
preserve the unit’s motor and your television screen.
≥ Total title number may not be displayed properly on iR/iRW.
DIRECT
TOP MENU
NAVIGATOR
PLAY LIST
MENU
CM SKIP
PauseStop
1Power ON.
2Open the disc tray.
3Load the disc.
4Start play.
Remote control sensor
≥
Load double-sided discs so the label for the side you want
to play is facing up.
≥
DVD-RAM: Remove discs from their cartridges before use.
Skip
≥ [DVD-VR]
Can also skip to the markers.
Stop
The position is memorized when “!” flashes on the display.
≥ Press [1] (PLAY) to resume. (
Resume play
)
≥ Press [∫] to clear the position.
≥ Even after the unit is turned off, the position is memorized
(
Normal playback only
).
Search (during play)
Slow-motion (during pause)
≥ Up to 5 steps
≥ Press [1] (PLAY) to restart play.
≥ [VCD] Slow-motion: forward direction only
≥ [MPEG4] Slow-motion: Does not work.
Pause
≥ Press [1] (PLAY) to restart play.
Repeat play
≥ Select “Repeat” (➜ page 12, Repeat play) or “A-B Repeat”
(➜ page 16, Play Menu).
If you are experiencing problems, refer to troubleshooting guide (➜ page 22-24).
Basic play
RQT8512-P.fm Page 9 Saturday, January 21, 2006 10:17 AM
To Next Page
Loading...
