Panasonic EB-A100 - Alarm; Display Time; Time Format

Application Menu 75
Time format:
From Application
1.
4 Clock > Settings > Time format A(Set)
2.
4 required format A(Select)
Display time:
You can show the time and date on the display in idle mode.
From Application
1.
4 Clock > Settings A(Select)
2.
4 Display time A(On/Off)
Alarm:
From Application
1.
4 Clock > Alarm A(Set)
2.
A(Set) > Enter the time (24 hour clock) A(OK)
3.
4 Repeat daily, Once or Disabled A(Select)
4. “Alarm time has been updated!”
A(OK)
¾ The alarm set indicator appears on the idle display.
¾ When the set time is reached, the alarm will sound.
If you are on a call, the phone will vibrate without sound.
To stop the alarm:
Press any key or A(Off)
OR
@(Pause) to pause the alarm and start again after 5
minutes
NOTE: Even if the phone is switched off, when the Alarm is set on,
the phone will switch on automatically and start the alarm.