DISASSEMBLY / REASSEMBLY INSTRUCTIONS
Issue 1 Section 6 PMCD030901C8
Revision 0 – 30 – Service Manual
6.2. Disassembly
6.2.1. Lower case assembly and main board removal
1. Remove the battery from the phone.
2. Using tweezers, remove the four grey screw caps. Discard these items.
3. Use the Trident screwdriver to remove the four case screws. Retain the screws for re-use.
4. Remove the I/O cover and retain for reassembly.
5. Set the phone into the ‘Open’ position.
6. Separate the two halves of the lower case assembly using a plastic strip (of credit card thickness) as shown.
10715-1
10716-1
10717-1
To Next Page
Loading...
