EN31
▶
Continued on the next page
Memory Course
Favorite settings that can be saved (Pages EN34 – EN37)
Creating Your Own Course
1
Select and activate manual action.
●
Adjust the setting to suit your preference.
2
Select the
个人化记忆
button you want to save and
press it for about 2 seconds.
The action currently in operation and the settings will be saved.
●
The
will flash, the will light up and the selected
button will light up.
●
The saved sequence will be displayed in
.
3
Select and activate the manual action that you want
to save next.
The saved action will be interrupted and the selected action will start.
●
The flashing of
will change and the button will flash.
●
Adjust the setting to suit your preference.
4
Press the same
个人化记忆
button for about 2
seconds.
The action currently in operation and the settings will be saved.
●
The saved sequence will be displayed in
.
●
The newly saved action will be inserted after the interrupted action.
●
The saved actions will start in sequence at intervals of about 1 minute.
(The FULL BACK ROLL time is different).
5
Repeat steps
3
–
4
.
●
Maximum 16 types can be saved.
You can freely combine
a manual action with a
stretch action!!
How to save a manual action
You can create your own course by saving manual action and stretch action in sequence in one of the memory courses.
Air action can also be saved simultaneously together with manual action.
To Next Page
Loading...
