EN32
Memory Course
(Continued)
You can freely combine
a manual action with a
stretch action!!
1
Select and activate the stretch action.
If you want to save several actions at the same time, select
and activate all the stretch actions that you want to save.
●
Adjust the setting to suit your preference.
●
When several actions are saved at the same time, the actions are
saved in sequence starting from the one on top.
“
颈部
” → “
肩胛骨
” → “
腰部
” → “
骨盆
” → “
脚部
” → “
躯干
”
2
Select the
个人化记忆
button you want to save and
press it for about 2 seconds.
The action currently in operation and the settings will be saved.
●
The
will flash, the will light up and the selected
button will light up.
●
The saved sequence will be displayed in
.
3
Select and activate the next stretch action that you
want to save.
The saved action will be interrupted and the selected action will start.
●
The flashing of
will change and the button will flash.
●
Adjust the setting to suit your preference.
4
Press the same
个人化记忆
button for about 2
seconds.
The action currently in operation and the settings will be saved.
●
The saved sequence will be displayed in
.
●
The newly saved action will be inserted after the interrupted action.
●
The saved actions will activate in sequence one at a time.
5
Repeat steps
3
–
4
.
●
Maximum 16 types can be saved.
How to save a stretch action
To Next Page
Loading...
