EP1285
ORDER NO.0808U08C1
- 7 -
4. DISPLAY METHOD OF MASSAGE BLOCK TOTAL USE TIME
AND OPERATION TIME
4.1. Total use time
1. Close the Cover of the Controller.
2. While pushing the Up/down buttons of neck roller position, turn on the Switch of the Power source switch block. Keep pushing
the Buttons more than approximately three seconds.(OFF/ON button lights.)
3. The total use time is indicated in the Screen of the Controller.
* If the total use time is less than five hours, no indications appear.If the total use time is less than ten hours, one LED lights,
which means five hours.
* It can indicate up to 5,115 hours.
How to read the total use time by the Controller
Sum the LEDs, which light.
For example, if 5, 40, and 160 light,
5 + 40 + 160 = 205 hours
To Next Page
Loading...
