EP1285
ORDER NO.0808U08C1
- 9 -
How to fold the Massage chair
1. ① Turn off the switch. ② Lock it. ③ Pull
off the Plug from the power source and
also from the Power source switch box.
2. Remove the Rear cushion and the
Headrest from the Massage chair.
3. Fold the Back rest.
① Insert the Screwdriver to top of
the Stopper hole of the Rear
cover for approx. 4cm till it hits
the Stopper.
② Push down the Screwdriver
diagonally for approx. 1 in.
(2.5cm) to release the Stopper.
③ Pull off the Screwdriver when
the Back rest starts falling.
* Be careful not to have the Controller cord or
Power cord hooked between the Back rest and
the Seat.
To Next Page
Loading...
