EP30006
ORDER NO.HPD0706U16C1
- 11 -
6. DISPLAY METHOD OF MASSAGE BLOCK TOTAL USE TIME
1. Insert the Power plug into the power source and turn on the switch of the Power source switch block.
2. While pushing the buttons of Ⅲ and Ⅳ, continue to push the On/off button for more than approximately three seconds.
Then, the button of USER D lights.
3. In ten seconds after the button of USER D lights, push the buttons as follows:①SELF PROGRAM⇒②LEG/FOOT⇒③
LOWER⇒④START
4. Push the button of Stop.
HOW TO READ THE DISPLAY OF THE ACCUMULATIVE OPERATION TIME
* Count the numbers of display as arrows.
To Next Page
Loading...
