ORDER NO. HPD1303U01PE
Model No. EP30006
Please revise the original parts list in the Service Manual (ORDER NO. HPD0709C21C1)to conform to the
change(s) shown herein. If new part numbers are shown, be sure to use them when ordering parts.
Reason for Change
*The circled item indicates the reason. If no marking, see the Notes in the bottom column.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7.
Correction
8. Other
Interchangeability Code
**The circled item indicates the interchangeability. If no marking, see the Notes in the bottom column.
Parts Set Production
Original
Early
A
New Late
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Original Early
B
New Late
Original parts may be used in early production sets only. New parts may be used in early or late
production sets. Use original parts where possible, then stock new parts.
Original Early
C
New Late
New parts only may be used in early or late production sets.
Stock new parts.
Original
Early
D
New Late
Original parts may be used in early production sets only. New parts may be used in late production
sets only. Stock both original and new parts.
E Other
Only replacement part number is changed.
Part Number
Model No. Ref. No. Original Part No. New Part No. Notes(*
,
**) Part Name & Descriptions Remarks
EP30006 46 EP3203K2058W WEP3203K2058 7*,C** POWER CORD
File this Parts Change Notice with your copy of the Service Manual.