IntroductionIntroduction
11
EVERVOLT Hybrid Inverter
and battery
Utility Grid
Smart Box
App
PV1
PV2 PV3
Generator
Load
Main panel
Meter
my EVERVOLT Cloud
DC Power
AC Power
Communication
Cloud
RSD
RSD
RSD
10
System overview of EVERVOLT Hybrid Inverter
3.2 Work Modes
EVERVOLT Hybrid inverter provides multiple work modes based on different
requirements. Some basic work modes of EVERVOLT Hybrid inverter are shown
below.
Contact us for additional or more complex application requirements.
Work mode: Self Use
The self-use mode is suitable for areas with low
feed-in tariffs and high electricity prices.
① When the power of PV is sufficient
The power generated from PV will be used to
supply the local loads first, then proceed to
charge the battery bank.
If the battery is fully charged, the excess power
will be exported to the public grid.(The inverter
will limit the output if Feed-in limit or zero feed-
in is needed)
(PV＞Load, PV Load Battery Grid)
② When the power of PV is insufficient
The power from PV and battery will be used to
supply the local loads. If the power is still not
enough, the remaining power will be taken from
the grid.
(PV＜Load, PV + Battery + Grid Load)
③ Without PV power
The power from battery will be used to supply
the local loads firstly. If the battery power is not
enough, the remaining power will be taken from
the grid. The inverter will enter into the standby
state.
(PV=0, Battery+Grid Load )
To Next Page
Loading...
