17
Type
Thru-beam · with operation mode switch on bifurcation
Front sensing Side sensing Front sensing Side sensing
Model No. (Note 2)
EX-15
(Note 5)
EX-15E EX-17 EX-17E
Sensing range 150mm 500mm
Minimum sensing
object
ø1 mm opaque object
(Completely beam interrupted object)
(Setting distance between emitter and receiver: 150mm)
ø2 mm opaque object
(Completely beam interrupted object)
(Setting distance between emitter and receiver: 500mm)
Hysteresis
-
Repeatability
Perpendicular to
sensing axis
0.05mm or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P10 % or less
Current consumption 25mA or less
Output
NPN open-collector transistor
● Maximum sink current: 100 mA
● Applied voltage: 30V DC or less (between output and 0 V)
Residual voltage: 2V or less (at 100mA sink current)
1V or less (at 16mA sink current)
Short-circuit
protection
Incorporated
Response time 0.5ms or less
Protection IP67 (IEC)
Ambient temperature -25 to +55°C (No dew condensation or icing allowed), Storage: -30 to +70°C
Ambient humidity 35 to 85% RH, Storage: 35 to 85% RH
Emitting element Red LED (Peak emission wavelength: 680nm, modulated)
Material Enclosure: Polyethylene terephthalate, Lens: Polyalylate, Bifurcation: Polyalylate
Cable
0.2 mm
2
3-core cabtyre cable, 2m long
(beyond bifurcation; from emitter / receiver to bifurcation: 0.5m long)
Wight
Net weight
55g approx
Gross
weight
80g approx.
Accessory Mounting screws: 1 set, Adjusting screwdriver: 1 pc, Instruction Manual
info@digiparts.ch
www.digiparts.ch
Ihr Schweizer Industriepartner
To Next Page
Loading...
