Panasonic EX-10 Series - 8 Specifications; Standard-Beam Type

16
8.
Specications
8-1 Standard-beam type
Type
Thru-beam type
Convergent
reective
(Diffused
beam type
)
Front sensing Side sensing Front sensing Side sensing Front sensing Side sensing Front sensing
Model No
(Note 2)
Light-ON EX-11A
(
-PN
)
EX-11EA
(
-PN
)
EX-13A
(
-PN
)
EX-13EA
(
-PN
)
EX-19A
(
-PN
)
EX-19EA
(
-PN
)
EX-14A
(
-PN
)
Dark-ON EX-11B
(
-PN
)
EX-11EB
(
-PN
)
EX-13B
(
-PN
)
EX-13EB
(
-PN
)
EX-19B
(
-PN
)
EX-19EB
(
-PN
)
EX-14B
(
-PN
)
Sensing range 150mm 500mm 1m
2 to 25mm
(Note 3)
(Center 10mm)
Minimum sensing
object
ø1mm opaque object
(Completely beam interrupted
object)
(Setting distance between emitter
and receiver: 150mm)
ø 2mm opaque object
(Completely beam interrupted
object)
(Setting distance between emitter
and receiver: 500mm)
ø 2mm opaque object
(Completely beam interrupted object)
(Setting distance between emitter and
receiver: 1m)
ø0.1mm copper
wire
(Setting dis-
tance: 10mm
)
Hysteresis
－
15 % or less
of operation
distance
(Note 3)
Repeatability
(Perpendicular to
sensing axis)
0.05mm or less 0.1mm or less
Supply voltage 12 to 24V DC ±10% Ripple P-P 10% or less
Current consumption Emitter: 10mA or less, Receiver: 10mA or less 13mA or less
Output
<NPN output type>
NPN open-collector transistor
● Maximum sink current: 50mA
● Applied voltage: 30 V DC or less (between output and 0V)
● Residual voltage: 2V or less (at 50mA sink current)
1V or less (at 16mA sink current)
<PNP output type>
PNP open-collector transistor
● Maximum source current: 50mA
● Applied voltage: 30 V DC or less (between output and +V)
● Residual voltage: 2V or less (at 50mA source current)
1V or less (at 16mA source current)
Short-circuit pro-
tection
Incorporated
Response time 0.5 ms or less
Protection IP67 (IEC)
Ambient temperature −25 to +55°C (No dew condensation or icing allowed), Storage: −30 to +70°C
Ambient humidity 35 to 85 % RH, Storage: 35 to 85% RH
Emitting element Red LED (Peak emission wavelength : EX-19E=624nm, except EX-19E= 680nm, modulated)
Material Enclosure: Polyalylate, Lens: Polyalylate
Cable (Note 4) 0.1mm
2
3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m long
Weight
Net
weight
Emitter, receiver: Approx. 20 g each(-C5 type : Approx.50 g each
）
Approx.20g
(- C5 type :
Approx
50 g
）
Gross
weight
Approx.50g(-C5 type : Approx.110 g
）
Approx.30g
( -C5 type :
Approx
60 g
）
Accessories Mounting screws: 1 set, Instruction Manual
info@digiparts.ch
www.digiparts.ch
Ihr Schweizer Industriepartner