Table of contents
1-3
1.2 Advance Preparation for Upgrade Tool
Advance preparation
1. Confirming applicable models: Confirm if the FP0H you use is the applicable model
for this tool.
- Applicable models: FP0H C32T/P
FP0H C32ET/EP
2. Open the cover and change the switch on the FP0H to PROG. mode.
3. Turn on the power to the FP0H and connect the USB cable to a PC. *
* Do not connect more than one FP0H to one PC.
System requirements: OS (WindowsXP SP3, Vista SP2, Windows7 SP1 or later, Windows8,
Windows10)
4. When FPWIN GR7 is active, set it to offline.
To Next Page
Loading...
