Panasonic FV-30BW2H - Louver and Remote Control Setup

12
To install louver assembly, first put the hook
on the right side of the louver into the product,
and then clamp the card slots in bottom
louver assembly in the grooves on the bottom
main body. Fix the panel to the body.
安裝面板 鈎 ，組合，先將面板右側的掛 扣入機體
再 組合 卡位卡入機體 凹槽，把面板 底部 底部
將面板組合固定於機體。
掛鈎
At the power cord lead-out side (left or
right), cut the outlet of the louver assembly
by tools according to the groove shape on
the back (nipper pliers) of the body assembly.
(Take left outlet of power cord for example)
面板組合安裝
面板組合的左右兩邊各設有一個電源線出線口，
使用工具(如尖嘴鉗等)按照出線口的凹槽形狀剪出
電源線引出側的出線口。(以左側出線為例)
4.Installing louver assembly
Pull out the filter.
Please remove the burrs of wire outlet before
leading out the power cord. Otherwise the
power cord may bedamaged.
將過濾網抽出。
請把出線口的披鋒處理後再引線，否則披鋒可能
會割傷電源線。
Make sure that the power cord is led
out from the corresponding louver
assembly outlet.
確保電源線從相應的面板組合出線口引出。
In the case of
left wiring:
左側出線時:
提示事項
Notice
Hook
安裝方法
HOW TO INSTALL
Filter
過濾網
螺絲蓋
用一字螺絲刀插入螺絲蓋的縫隙，
往外撬開螺絲蓋。
Screw cap
Insert a slotted screwdriver into the
gap in the screw cap and open the
screw cap outwards.
4
-1
4
-2
4
-3
凹槽
Groove