EasyManua.ls Logo

Panasonic FV-SWGR1 - Installation and Operating Requirements; Supplied Accessories; Part Names and Dimensions

Panasonic FV-SWGR1
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
The remote control can link up to 10 energy recovery ventilators.
The mounting surface should be as flat as possible to prevent deformation of the
product. (If the wall is not flat, the LCD screen may be damaged, or faults may occur.)
If the installation position is too high or too low, you may not be able to see the
LCD screen clearly. It is recommended that the product be mounted 1.5 m or so
above the ground for clear vision. For users with physical disabilities and wheelchair
users, the height may need to be adjusted accordingly in line with local regulations.
The remote control with the RS485 function shall be at least 1 m away from TV sets,
broadcast radios, computers, etc. (Otherwise, it may cause distorted or skewed images
or noises.)
The switch box required for installation is included inside the packing case of the ERV.
Always keep in mind the appearance specifications of the remote control, and ensure
that the switch box you bought can match the remote control.
Recommended exterior dimensions: 102 mm x 102 mm x 35 mm (H x W x D).
Outside view
Unit: mm
The product comes with the following accessories. After unpacking the packing case, check that all items
are included. If anything is missing, please contact your dealer.
No.
Figure
Quantity
Name
Remote Control
Installation and Operating Instructions
Screws (M4x20)
1
4 1
1
2
3
INSTALLATION AND OPERATING REQUIREMENTS
SUPPLIED ACCESSORIES
PART NAMES AND DIMENSIONS
120
116
40
26
65.5
83.5
68
46
Switch Box
Protective film Top cover
Base
Left back cover
of base
Right back cover
of base
83.5 mm
102 mm
102 mm
46 mm

Related product manuals