To Next PageTo Next PageWhat to do if I forgot my Panasonic Desktop password?
If you've forgotten your Panasonic Desktop password: * For Supervisor or User Passwords, consult the system administrator. * If you have a password reset disk, use it to reset the administrator password. * If you lack a password reset disk, reinstall ( Installing Software) and set up Windows, then create a new password.
Why is my Panasonic Desktop screen dark?
If your Panasonic Desktop screen is dark: * Note that the screen is darker when the AC adapter is disconnected. * Press ?Fn? + ?F2? to adjust the brightness. * Press ?Fn? + ?F8? to turn off the concealed mode. * The display screen brightness adjusts automatically based on ambient light detected by the ambient light sensor under factory default settings.
What to do if my Panasonic Desktop screen is disordered?
If your Panasonic Desktop screen is disordered: * Changing the number of display colors and resolution may affect the screen. Restart the computer. * Connecting/disconnecting an external display may affect the screen. Restart the computer. * Resuming from sleep or hibernation may affect the screen of the external display. Restart the computer.
What to do if my Panasonic Desktop has no display?
If there is no display on your Panasonic Desktop: * The external display is selected. Press ?Fn? + ?F3? or ? ? + ?P? to switch the display. * Check the cable connection. * Turn on the display. * Check the settings of external display. * The display is turned off by the power-saving function. * The computer entered sleep or hibernation by the power-saving function.
Why doesn't the Panasonic Desktop screen become bright?
The brightness is set low to avoid malfunction where surrounding temperature is high on your Panasonic Desktop.
Why does it take time for the power indicator to light up on my Panasonic Desktop?
If the power switch is pressed immediately after the battery pack has been mounted on the computer, and while the AC adaptor is not connected, it may take about 5 seconds before the power indicator lights up and the Panasonic Desktop turns on. This is because the computer is checking the remaining battery charge; it is not a malfunction.
Why doesn't the external display work normally on my Panasonic Desktop?
If the external display does not support the power saving function, it may not work normally when the Panasonic Desktop enters the power saving mode. Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.).
How to fix Panasonic Desktop when access point is not detected?
If your Panasonic Desktop is not detecting the access point: * Shorten the distance between the computer and the access point, and try the detection again. * Confirm that [Wireless LAN] of [Wireless Configuration] is set to [Enabled]. * Check the channel being used by the access point.
How to fix no sound on Panasonic Desktop?
If there is no sound on your Panasonic Desktop: * Press ?Fn? + ?F4? or ?Fn? + ?F6? to cancel mute. * Turn off the concealed mode. * Restart the computer.
Why can't I connect to a network on my Panasonic Desktop?
If you cannot connect to a network with your Panasonic Desktop, set the device ([LAN] / [LAN (2nd)] / [Wireless LAN] / [Wireless WAN]) to [Enabled] in the [Advanced] menu of the Setup Utility.
Provides liability information and terms of use for the manual.
Explains manual conventions, operation terms, and terminology used.
Notes on Windows 11 interface and screen messages.
Steps to access and configure system settings in Windows.
Information on potential sound interruptions and startup sound.
Guide on how to update Windows to the latest patches.
Step-by-step instructions for detaching and reattaching the computer's keyboard.
Detailed steps to install an expansion module into the rear expansion area.
Step-by-step guide for installing an option into the right expansion area.
Instructions for installing an option into the left expansion area.
Procedure for installing an option into the palm rest expansion area.
Items needed and steps to prepare for creating a recovery disc.
Step-by-step instructions for creating a system recovery disc.
Procedure for backing up the computer's flash memory data.
Steps to restore the computer's flash memory from a backup.
Identification and description of parts located on the front side of the computer.
Description of the LCD, various LED indicators, and input devices like touchpad.
Details on expansion areas and related ports.
Identification of ports and connectors on the right side of the computer.
Identification of ports on the left side and description of the battery.
Identification of ports and connectors on the rear side of the computer.
Instructions on how to power on the computer.
Procedures for shutting down and completely powering off the computer.
Explanation of touchpad operations and functions.
Procedure to enable or disable the touchpad function.
Explanation of various function key (Fn) combinations for system control.
How to configure hotkey functions, including Fn key lock.
Guide on customizing the P buttons and A keys for specific functions.
Steps for removing and inserting the computer's included pen.
Explanation of basic touchscreen interactions like tap and touch-and-hold.
Description of gestures like spread/pinch, drag, swipe, and flick on the touchscreen.
Options for configuring the touchscreen mode (Auto, Pen, Touch, etc.).
Step-by-step guide to calibrate the touchscreen for accurate input.
Details on programmable buttons (P1-P4) and Fn key combinations (Fn+1-4).
Guidance on using the battery to minimize deterioration and maximize lifespan.
Advice on optimal charging temperatures, frequency, and timing.
Tips and settings to extend the computer's battery life during use.
Explanation of the LED indicator lights for battery status during operation.
Meaning of LED indicators when replacing the battery pack.
Information on battery charging and how to check the remaining battery power.
How the computer behaves at low battery levels and actions to take.
Procedure to recalibrate the battery display for accurate readings.
Step-by-step instructions for replacing the battery pack when the computer is off.
Explanation of computer sleep and hibernation modes and their benefits.
How to configure when the computer enters sleep mode based on inactivity.
Important warnings and conditions to avoid when using sleep or hibernation.
Methods for initiating sleep or hibernation using hardware or function keys.
Procedures for waking the computer from sleep or hibernation states.
Setting the computer's power status based on AC adaptor connection/disconnection.
Configuration options for the Modern Standby mode, especially in battery state.
Steps to start and access the Panasonic PC Settings Utility application.
Instructions for connecting the computer to a wired network via the LAN port.
Procedure to enable or disable all wireless communications using Airplane mode.
Methods for quickly turning wireless communication (Wi-Fi) on or off.
Steps to turn on wireless LAN communication for network access.
Guide on connecting to a wireless network by selecting an access point.
Procedure to turn on and enable Bluetooth communication.
How to check the current status of Bluetooth communication.
Detailed instructions for installing and removing nanoSIM cards for wireless WAN.
Steps to connect to a network, including adding an APN if necessary.
Procedure to disconnect the computer from a network connection.
How to use the "Panasonic PC GPS Viewer" to check GPS information.
Configuration options for passing external antenna signals through the computer.
Techniques and settings to reduce the computer's power usage.
Steps to adjust power modes and enable battery saving functions.
Procedure for setting and managing supervisor, user, and Windows Hello passwords.
Information on device encryption and disabling USB devices for security.
How to turn the concealed mode on or off using function keys or buttons.
Steps to start and use the Waves MaxxAudio application for sound adjustment.
Steps to start and use the utility for adjusting display modes and brightness.
Procedure to access and start the computer's Setup Utility (BIOS/UEFI).
Configuration options for boot order, device startup, and security features.
Recommended environmental conditions and handling precautions for the computer.
Instructions for handling the optical drive, its tray, and caring for discs.
Table detailing read speeds for various disc formats.
Table detailing recommended discs and speeds for writing.
Step-by-step instructions for inserting and removing discs from the drive.
Procedures for installing and launching the PowerDVD software for disc playback.
Information on DVD/BD region codes and how to manage settings.
Steps to burn files to a disc using built-in Windows functionality.
Guide for installing the Power2Go software for disc copying and creation.
Detailed instructions for inserting and removing microSD memory cards.
Step-by-step guide for handling smart cards in the computer's slot.
Detailed procedure for installing a RAM module into the computer.
Instructions for connecting the computer to an external display via HDMI port.
Ways to switch display modes using hotkeys or display settings.
Information and usage of the extended desktop display mode.
Steps for connecting USB devices to the computer's ports.
Information on using the USB Type-C port for charging external devices.
Details about the USB Power Delivery standard and its capabilities.
Instructions for connecting a serial device to the computer's serial port.
General information on using the computer's camera and its indicator.
Explanation of the ambient light sensor's role in automatic brightness adjustment.
Information on the utility software for using the camera to capture images and videos.
Procedures for taking photos and recording videos with the camera utility.
How to view recorded images and videos.
Options for configuring camera settings like brightness, contrast, and resolution.
Steps to prepare the barcode reader software and hardware.
Instructions on how to aim and scan barcodes using the reader.
Guidance on positioning RFID tags or smart cards for reading.
Overview of fingerprint authentication using Windows Hello.
Steps to remove stored fingerprint data for account security.
Advice on proper handling, cleaning, and troubleshooting for the fingerprint reader.
Step-by-step instructions for removing the SSD pack from the computer.
Procedure to erase data from the SSD pack using the Setup Utility's Secure Wipe.
Instructions for docking the computer to the port replicator.
Steps for undocking the computer from the port replicator.
Instructions for attaching the D-rings and strap to the computer.
Identification of the components of the battery charger.
Explanation of the LED indicators on the battery charger.
Step-by-step guide for charging the battery pack using the charger.
Solutions for issues related to powering on, sleep, and resuming the computer.
Resolving problems with computer startup, password entry, and login.
Troubleshooting steps for display issues like no display or dark screen.
Solutions for sound problems such as no sound, distortion, or microphone issues.
Troubleshooting steps for keyboard input and optical disc drive operations.
Solutions for issues with network connection and wireless communication.
Troubleshooting for common problems with peripherals, GPS, and serial ports.
Solutions for problems with wireless LAN, Bluetooth, touchpad, and card readers.
Troubleshooting for fingerprint reader failures and user switching problems.
Steps to launch the utility for viewing computer usage statistics.
Procedures for saving computer usage data as a text file or screen image.
List of hardware components that can be checked using the PC-Diagnostic Utility.
Advice and recommendations for using the PC-Diagnostic Utility effectively.
Step-by-step instructions for executing hardware diagnostic tests.
Steps to prepare the computer before initiating a reset or reinstallation.
Procedure to reset the computer while keeping personal files.
Instructions for installing software and performing disk recovery.
Steps for using a recovery disc to restore the system or partitions.
Solutions for various error messages encountered during system operation.
Information on network connectivity software and the fast startup feature.
Using the utility to securely erase data from the hard disk before disposal.
Steps to take before disposing of the computer, including data erasure.
Detailed specifications for the computer's core hardware components.
Technical specifications for wireless LAN and Bluetooth modules.
Specifications for expansion slots and optional devices like SSDs and card readers.
Statement of compliance with EU directives for wireless WAN modules.
The full text of the GNU General Public License agreement.
Details of the limited hardware warranty for products sold in the USA.
Information on extended warranty options like Protection Plus and Ultimate Care.
Comparison of warranty terms and coverage for US and Canadian customers.
Warranty terms for software media and general exclusions from coverage.
Warranty coverage for the media containing the operating system and pre-installed software.
General