Opening and closing the USB port cover
Opening the cover
1. Put your fingertip on the tab (circled in the illustration), and slide the cover in the direction of the arrow
until you hear a click.
2. Open the cover as shown below.
Closing the cover
1. Close the cover firmly to seal it closed.
• Close the cover firmly until the red lines on the sides of the cover (A) are no longer visible.
2. Lock the cover by sliding it in the direction of the arrow until you hear a click.
• Close the cover firmly until the red area (circled in the illustration) of the cover is no longer visible.
IMPORTANT
• Observe the following to ensure the waterproof and dustproof performance of the unit.
– Make sure the USB port cover is securely closed and locked when the USB port is not being used.
– When closing the USB port cover, make sure there is no debris around the cover.
– Make sure the gasket of the USB port cover is not damaged, deformed, or peeled off.
12 Operating Instructions - Reference Manual
Getting started
To Next Page
Loading...
