Installing and removing the battery
• If the cover latch is closed, open it (page 16).
Installing the battery
1. Insert the tabs at the battery’s terminal side into the notches of the unit (A), and then lower the battery
into place (B).
2. Press down firmly on the outside edges of the battery to seal it closed.
3. Close the cover latch (A) and lock it (B) by sliding the cover latch lock (circled in the illustration) toward
.
• Close the cover latch and the cover latch lock firmly until the red areas are no longer visible.
IMPORTANT
• Observe the following to ensure the waterproof and dustproof performance of the unit.
Operating Instructions - Reference Manual 15
Getting started
To Next Page
Loading...
