– When installing the battery, make sure there is no debris lodged in the gasket of the battery and
the unit.
– Make sure the gasket of the unit is not damaged, deformed, or peeled off.
– Always make sure the battery is securely installed and locked.
Removing the battery
• Make sure to turn off the unit before replacing the battery.
1. Unlock the cover latch by sliding the cover latch lock (circled in the illustration) away from
(A),
and then open the cover latch by sliding it (B).
2. Insert your fingertip into the groove (circled in the illustration), lift the battery (A) and then remove it
(B).
IMPORTANT
• Do not remove the battery while the unit is wet. When the unit is wet, remove the water by wiping
off the water droplets and thoroughly drying the unit before removing the battery. (See
“Waterproof/dustproof” (page 6).)
16 Operating Instructions - Reference Manual
Getting started
To Next Page
Loading...
