Installing a SIM card (models with wireless WAN only)
• When installing or removing a SIM card, place the unit on a flat surface.
• If a battery is installed, remove it (page 16).
1. Insert the SIM card into the Nano SIM card slot (SIM Slot 1).
• Install only Nano SIM cards.
• Hold the SIM card so that the metal terminals are facing down, and insert with the notch facing in
the same direction of the circled area in the illustration below.
• <Only for models with a single SIM card slot>
The SIM card will not be recognized unless it is inserted into SIM Slot 1.
• <Only for models with dual SIM card slots>
To install another SIM card, use slot 2. The procedure is the same as slot 1.
2. Slide the SIM card until you hear a click.
• To remove a SIM card, push it slightly into the slot to eject it.
14 Operating Instructions - Reference Manual
Getting started
To Next Page
Loading...
